Tilta Nucleus-Nano Wireless Lens Control System

Full day rate: $35.00

Total including 5% insurance & 10% GST : $40.43

0 in bag [view hire bag]
Tilta Nucleus-Nano Wireless Lens Control System

Product Description


The Tilta Nucleus-Nano is a revolutionary wireless lens control system specifically designed for handheld gimbal systems. It makes it possible for a single operator to control a lens gear while simultaneously operating their gimbal. The Nano system is compatible with all DSLR, mirrorless, & modified “cine-style” vintage photo lenses.

The Nano Hand Wheel Controller has a compact knob design similar to professional follow focus hand units (the design is very similar to the Tilta Nucleus-M hand unit’s focus wheel). The Nano Hand Wheel Controller has no delay. It is highly responsive, wireless, & accurate. It is powered via a single 14500 rechargeable battery (which is included in the kit) for 6 hour operating time.

The Nucleus-Nano uses a brand new state of the art power-efficient miniature motor. The Nano Motor features low noise & high torque. It can perform super-fast focus pulls with silent precision! The built-in 15mm rod adapter allows for flexibility & compatibility with a wide range of camera rigs & professional mounting solutions.

The motor has a 5-18V input tolerance for power via a Micro USB port. This allows the motor’s power to be drawn from 5V Micro USB output or via a D-Tap.

The Nano Motor has its own built-in motor drive that communicates directly with the Nano Hand Wheel Controller. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup & a quicker setup time. Simply set the Nano Motor & Nano Hand Wheel Controller to the same channel & you will have full control. The wireless range of both the Nano Hand Wheel Controller & Nano Motor is 300 feet!

The Nano Motor allows for automatic calibration of the lens as well as a manual calibration if you are using lenses that don’t have hard end stops at close focus & infinity via the ability to set A-B limits on the Nano Hand Wheel Controller. Every motor has a 0.8 mod, which is the standard gear size for most cinema lenses. The torque of the Nucleus-Nano Motor at 5.5V is 0.65Nm & at 14.8V is 1Nm

The Nano Motor is also able to connect to the Nucleus-M’s FIZ hand unit & hand grips, allowing for a variety of ways to control the motor as you see fit.

Lastly, the Nano system can provide record Run/Stop functionality for numerous camera systems.

Included:

  • 1 x Nucleus-Nano Hand Wheel Controller
  • 1 x Nucleus-Nano Wireless Follow Focus Motor
  • 1 x 15mm Single Rod Mounting Baseplate For 95mm Lens
  • 2 x 1/4″-20 Hex Screws
  • 2 x Rod Mount Hex Screw
  • 1 x 15mm x 100mm Black Aluminium Rod
  • 1 x 31cm 5V Micro USB male to 5V Micro USB male motor power cable
  • 1 x 12V / 2A Ronin-S to 5V Micro USB male motor power cable
  • 2 x Photographic lens follow focus gear rings
  • 1 x Nucleus-Nano Hand Wheel Attachment Plate for Ronin-S/G2x
  • 1 x Nucleus-Nano Hand Wheel Attachment Adapter for Zhiyun Crane 1
  • 1 x Nucleus Hand Wheel to 15mm Rods Bracket
  • 1 x 14500 Battery Charger
  • 2 x 14500 Batteries
  • 1 x M4 Allen key
  • 1 x M6 Allen key
  • 1 x User Guide

Links & Downloads:


How does Hire work?

For a trouble free experience please follow these steps.

Step 1:Explore the options then add your gear to the Hire Bag. If what you’re after is not listed please add it in comments or simply Contact Us.

Step 2:View your Hire Bag & select the date & duration of the hire including the desired collection time.

Step 3:Once you're done review your Hire Bag & add any special requirements in the Message field.

Step 4:Submit to Request a Quote. You'll receive a copy of your request.

Step 5:Urban Cine will follow up with questions &/or send a formal quote.

Step 6:Insurance & ID: To ensure insurance for hired equipment is valid Urban Cine Pty. Ltd. asks you to verify your identity. By doing so you are supplying the required 100 points of ID. This will protect both you the Hirer & Urban Cine Pty. Ltd. You will receive an SMS. Just follow the prompts. For more info see OCR Labs IDKit

Step 7:Payment: For new customers payment is required prior or on collection. If you have a history with Urban Cine a credit account may offered.

Step 8:Using Equipment: It’s fair & reasonable to expect the hirer has the skillset to use equipment in a respectful & professional manner.

Step 9:Please report equipment failures & breakages. Feedback is important. If you’re experiencing issues with equipment on set please call asap. Often issues can be rectified over the phone.

View Terms & Conditions of Hire
ask pete